Flag & Windsock Pole Mounting Hardware & Kits price list
Last updated Saturday, Oct 17, 2026
| Flag & Windsock Pole Mounting Hardware & Kits | Price |
|---|---|
| Icc Iccmsljb01 Runway Kit - J-bolt | $6.12 |
Flag & Windsock Pole Mounting Hardware & Kits
Loading...
Loading...
Last updated Saturday, Oct 17, 2026
| Flag & Windsock Pole Mounting Hardware & Kits | Price |
|---|---|
| Icc Iccmsljb01 Runway Kit - J-bolt | $6.12 |
Choosing the right mounting hardware can make a flag or windsock installation feel straightforward instead of frustrating. The challenge is that similar-looking brackets, bolts, runway parts, and pole accessories can serve very different purposes. Before you buy, you need to know what the hardware is designed to secure, where it fits, and whether it matches your existing setup.
In the available comparison data, the ICC ICCMSLJB01 Runway Kit - J-bolt is listed under flag and windsock pole mounting hardware and kits. However, its supplied description identifies it as a runway J-bolt kit for standard ladder rack runways. That distinction matters. It may be relevant to a broader mounting or support project, but the listing does not specifically confirm that it is a complete flagpole or windsock mounting kit.
ZoneOffer is a comparison site, not a store. Its role is to help you review available product information and compare options. The ICC product in this guide is listed through The Twister Group at $6.12, based on the supplied data.
The ICC ICCMSLJB01 is described as a runway kit with J-bolts. The package contains two pieces, making it a small hardware set intended for a specific fastening task rather than a complete installation system.
According to the product information, the J-bolts are designed to insert over and secure runway sections used with standard ladder rack runways. Think of them as small anchors that help hold a section in place. They are not described as a flag, windsock, pole, bracket, base, rope, or pulley.
That makes the product especially important to evaluate by function rather than by category name alone. A product may appear in a mounting-hardware category while still being designed for a specialized runway application. If you are searching for flag and windsock pole mounting hardware, read the compatibility details carefully before placing an order.
The listing provides several practical specifications for the ICC ICCMSLJB01 Runway Kit - J-bolt. The kit includes two pieces and measures approximately 3.5 inches long, 1.5 inches wide, and 0.25 inches high.
The listed weight is 0.45 pounds. The product is associated with raceway kits and accessories, and its description indicates that wall mounting equipment is included as a product attribute. The packaging type is a plastic bag.
The supplied information also lists a 3-year warranty and indicates RoHS compliance. The country of origin is listed as the United States, with an important qualification: the origin information was provided by the manufacturer and was not verified in the source data.
Product: ICC ICCMSLJB01 Runway Kit - J-bolt
Quantity: Two pieces
Dimensions: 3.5 inches by 1.5 inches by 0.25 inches
Weight: 0.45 pounds
Application described by the listing: Securing runway sections used with standard ladder rack runways
Related attributes: Raceway kits and accessories; wall mounting equipment
Packaging: Plastic bag
Warranty: 3 years
Listed price: $6.12 through The Twister Group
Not according to the specific description supplied. The product is listed in a category connected with flag and windsock accessories, but the product details describe a runway J-bolt for ladder rack runways. The information does not state that it mounts a flagpole, supports a windsock, attaches to a pole, or includes a flag bracket.
That does not automatically make it useless for your project. Some installations involve custom supports, wall-mounted structures, or related hardware where a specialized fastener may have a role. Still, you should not assume that a runway J-bolt can replace a dedicated flagpole bracket or windsock mounting arm.
Would you use a key designed for one lock in another lock without checking the shape? Probably not. The same approach applies here: match the hardware to the system it was made to secure.
Start by identifying the structure you need to secure. Is it a standard ladder rack runway, a wall-mounted flagpole bracket, a freestanding pole, or a windsock frame? The product description specifically references standard ladder rack runways, so that should be your first compatibility checkpoint.
Next, compare the dimensions of the existing mounting channel or runway section with the J-bolt dimensions. The listing gives the product size as 3.5 inches long, 1.5 inches wide, and 0.25 inches high. Those measurements can help you determine whether the part has a reasonable physical fit, but they do not confirm compatibility with every runway or mounting design.
Finally, check the manufacturer or installer documentation for your existing system. Look for references to ICCMSLJB01, standard ladder rack runways, J-bolt fasteners, or compatible runway accessories. If your project involves a flag or windsock pole, verify that the mounting design accepts this type of hardware before relying on it.
Does my project use a standard ladder rack runway?
Does the installation require a J-bolt rather than a different fastener?
Do the listed dimensions fit the channel, bracket, or runway section?
Am I buying a small fastening kit or expecting a complete flag or windsock mounting solution?
Does my project require additional brackets, poles, clamps, or support hardware?
The ICC ICCMSLJB01 kit contains two J-bolts. That quantity may suit a small repair or a specific connection point, but the supplied data does not state how many bolts are required for a complete installation. Your actual needs will depend on the runway length, support layout, mounting points, and instructions for the system being assembled.
Before starting, count the attachment points in your project. If the design calls for more than two fasteners, one kit may not be enough. On the other hand, ordering extra hardware without confirming compatibility can create unnecessary cost and leave you with parts that do not match your setup.
Installation should follow the instructions for the compatible runway or mounting system. The available product data explains what the J-bolts are designed to secure, but it does not provide a step-by-step installation procedure. For that reason, avoid guessing about tightening methods, tools, spacing, or load limits.
Small hardware can have a big job. A difference of a fraction of an inch may affect whether a fastener passes through a channel, reaches a mounting point, or sits correctly against the supported section.
The listed dimensions are 3.5 inches by 1.5 inches by 0.25 inches. Use those measurements as a starting point when comparing the J-bolt with your equipment. Keep in mind that the listing does not explain which measurement corresponds to each part of the bolt’s shape or how much usable clearance is required during installation.
It is also wise to consider access around the mounting area. Even when a bolt fits on paper, nearby walls, brackets, cables, or runway sections may make installation difficult. Measure the working space as well as the hardware itself.
The supplied reference data identifies the packaging as a plastic bag, but it does not specify the bolt material, finish, corrosion resistance, or color. If your project is outdoors, those missing details may be important, especially where the hardware could be exposed to rain, humidity, or changing temperatures.
Because the product is associated with runway and wall-mounting equipment, it is best to confirm environmental suitability from the applicable documentation. Do not assume that a listed mounting accessory is automatically intended for outdoor flag or windsock use.
The data also lists RoHS compliance. This is a product attribute in the reference information, but it should not be confused with a statement about outdoor durability, structural load capacity, or weather resistance. Each characteristic answers a different question.
The ICC ICCMSLJB01 listing includes a 3-year warranty. A warranty can provide useful reassurance, but it does not replace compatibility checks. A product may have warranty coverage while still being unsuitable for a particular flagpole, windsock, wall, or runway system.
Review the warranty information alongside your project requirements. Pay attention to whether your intended use matches the product’s described application. The available data confirms the warranty length, but it does not provide the full warranty terms or exclusions.
The listed price is $6.12 through The Twister Group. Since prices can change, treat this figure as the price shown in the supplied comparison data rather than a permanent price guarantee. ZoneOffer does not sell the product directly.
This J-bolt kit may be relevant to someone working with standard ladder rack runway sections and looking for a small, purpose-specific fastening component. It could also appeal to a maintenance professional or installer who already understands the runway system and needs the listed ICC part.
It may be less suitable for someone searching for an all-in-one flagpole mounting kit. If you need a pole bracket, wall mount, windsock arm, pulley, rope, or base, those components are not identified in the product description. You would need to locate products that specifically provide those functions.
The best buyer is not simply someone who sees a low price. It is someone who recognizes the application, checks the dimensions, and knows how the J-bolt fits into the larger structure.
Dedicated flag and windsock mounting hardware generally focuses on holding a pole, attaching a decorative or signal flag, supporting a windsock frame, or allowing a fabric item to move freely in the wind. The ICC ICCMSLJB01 description focuses instead on securing runway sections.
That difference helps you build a more accurate shopping list. A complete outdoor display or windsock installation may require several parts, while this listing covers only a two-piece J-bolt kit. The reference data does not identify any bundled pole, bracket, windsock, flag, or accessory beyond the J-bolts.
When comparing products, look beyond words such as “mounting” and “kit.” Ask what the kit actually mounts, what it contains, and what system it supports. Clear answers can prevent a frustrating mismatch.
A good purchase decision combines application, measurements, quantity, and price. For this product, begin with the application: standard ladder rack runway sections. Then confirm the dimensions and determine whether two pieces meet your project’s needs.
Next, consider the surrounding hardware. If your project is a flag or windsock installation, identify every component required before ordering. A small fastening kit may be only one piece of the puzzle, like a single hinge in a larger gate.
Finally, compare the available information with your project documentation. The listing gives useful details, including the quantity, size, weight, warranty, packaging, and listed price. It does not provide complete confirmation for every flag or windsock application, so compatibility remains your responsibility to verify.
The ICC ICCMSLJB01 Runway Kit - J-bolt is a compact two-piece hardware set listed at $6.12 through The Twister Group. Its described purpose is securing runway sections used with standard ladder rack runways, with dimensions of 3.5 inches by 1.5 inches by 0.25 inches and a listed weight of 0.45 pounds. Although it appears within a flag and windsock accessory category, the available information does not identify it as a complete flagpole or windsock mounting kit. Check your system, compare the measurements, confirm the required quantity, and use the product only where its documented application fits.