Printer Duplexers price list
Last updated Wednesday, Oct 14, 2026
| Printer Duplexers | Price |
|---|---|
| Icc Icfoj9c303 Jumper - Sc-st | $10.12 |
Printer Duplexers
Loading...
Loading...
Last updated Wednesday, Oct 14, 2026
| Printer Duplexers | Price |
|---|---|
| Icc Icfoj9c303 Jumper - Sc-st | $10.12 |
Choosing the right cable can feel like selecting the correct key from a crowded ring. The connector may look familiar, yet small differences in fiber type, length, construction, and compatibility can determine whether your installation works smoothly. The ICC ICFOJ9C303 Jumper is a duplex multimode fiber optic cable listed in the supplied product data, with SC-to-ST connectors and a length of approximately 9.8 feet.
This guide explores what the product offers, where it may fit into a network setup, and which details deserve attention before you compare an offer. Although the product appears within a printer duplexer category, its description identifies it as a fiber optic jumper rather than a traditional printer duplexing accessory. That distinction matters, so let’s look at the product based on the information available.
The ICC ICFOJ9C303 is described as a duplex multimode fiber optic jumper. In simple terms, it is a pre-terminated cable designed to carry optical signals through two fiber strands. The word “duplex” here refers to the cable’s fiber configuration, not to automatic two-sided paper printing.
The listed model uses SC-to-ST connectors. One end has SC connectors, while the other uses ST connectors, making the jumper potentially useful when two compatible network components rely on these different connector styles. Before purchasing, you should always check the ports on both pieces of equipment. A connector mismatch is like trying to fit a round peg into a square opening: the cable may be well made, but it will not be the right match.
The product data identifies the fiber specification as 62.5/125 M multimode fiber. It also lists a 3-meter length, which is approximately 9.8 feet. This gives you a reasonable amount of reach for many equipment-to-equipment connections without requiring a long cable run.
Because the jumper is duplex, it contains paired fiber paths. That design is commonly associated with transmitting and receiving optical signals through separate strands. The exact performance of any connection still depends on the network hardware, transceivers, fiber standards, and installation conditions involved.
The following information comes directly from the supplied reference data. Reviewing these details first can help you decide whether the ICC jumper belongs on your shortlist.
Model: ICC ICFOJ9C303 Jumper
Connector configuration: SC-to-ST
Fiber type: Duplex multimode
Fiber specification: 62.5/125 M
Length: 3 meters, approximately 9.8 feet
Cable rating: OFNR riser-rated cable
Brand: ICC
Listed seller: The Twister Group
Listed price: $10.12
Warranty: 3 years
RoHS information: Listed as compliant in the supplied data
Packaging: Plastic bag
Country of origin: Taiwan
Connector type is one of the most important details in any fiber purchase. The ICC ICFOJ9C303 uses SC-to-ST termination, so it is designed for connections involving these two connector families. SC connectors are commonly recognized by their square form and push-pull coupling style, while ST connectors use a round body with a bayonet-style twist connection.
Why does this matter? Fiber connectors are not interchangeable simply because they are all used with optical cable. An SC port does not accept an ST plug, and an ST port does not accept an SC plug. The mixed connector arrangement can be useful when your equipment has different interfaces, but you should confirm both ends before ordering.
Start by inspecting the ports on the equipment you plan to connect. Look for labels, product documentation, or connector illustrations. If one device uses SC and the other uses ST, this jumper may match the connection pattern described in the reference data.
If both devices use the same connector type, this particular cable may not be suitable without additional components. Those components are not included in the supplied product information, so it would be unwise to assume they are part of the offer.
The 62.5/125 designation describes the approximate dimensions of the fiber core and cladding in microns. The “M” indicates multimode fiber. Multimode fiber is designed for optical signals that travel through multiple paths within the fiber core.
You do not need to memorize the terminology, but you do need to match the cable to your equipment. Network hardware may be designed for specific multimode fiber specifications, and using an unsuitable fiber type can affect compatibility. Think of it like matching a charger to a device: the cable may physically connect, but the complete system still needs to be compatible.
The product description specifically identifies the ICC jumper as 62.5/125 M. That makes this detail especially important for buyers replacing an existing cable or adding a jumper to an established fiber network.
The listed cable length is 3 meters, or approximately 9.8 feet. This length can provide flexibility when network equipment is positioned within the same rack area, cabinet, room, or nearby equipment zone. It may help reduce the need to place devices directly beside one another.
At the same time, extra cable should not be treated as unlimited freedom. Fiber installations benefit from organized routing and careful handling. You should plan the path before connecting the cable, leaving enough slack for equipment movement without creating unnecessary loops or sharp bends.
Measure the distance between the two connection points and consider how the cable will travel. A direct route may be shorter than the distance measured in a straight line if the cable must pass through a rack or around other equipment. The ICC jumper’s approximately 9.8-foot length gives you a defined limit, so measuring first can prevent an avoidable mismatch.
It is also wise to keep the cable away from areas where it could be crushed, pinched, or repeatedly pulled. Fiber cable is built for data transmission, not for use as a handle or support strap. Gentle routing helps protect the connection and keeps the installation tidy.
The description states that the jumper is made from OFNR riser-rated cable. OFNR is a designation used for optical fiber cable intended for certain vertical or riser applications. The product data also states that the cable exceeds all industry requirements, but it does not provide a complete list of those requirements or installation rules.
That means you should treat the rating as one part of your selection process rather than as a universal approval for every building location. Building codes, pathways, and installation conditions can vary. If the cable will be installed in a commercial facility or structured cabling system, review the relevant requirements for that site.
A cable rating can help you narrow your options, much like a road sign helps guide a driver. It tells you something important about intended use, but it does not replace checking the full route. Confirm that the OFNR designation fits your planned installation and that the cable length and connector types also match your equipment.
The reference data lists a 3-year warranty for the ICC ICFOJ9C303 jumper. A warranty can add confidence when you are comparing similar cables, especially if the product is part of a larger network installation. However, the supplied data does not describe the warranty’s terms, exclusions, claim process, or coverage conditions.
The product information also lists the country of origin as Taiwan, identifies the packaging as a plastic bag, and states that RoHS compliance is listed. These details may matter if you are organizing equipment records, following purchasing requirements, or prioritizing environmental and material compliance information.
At the same time, the data says that some information was provided by the manufacturer and not verified. That is a useful reminder to confirm critical specifications before placing an order, particularly when your installation depends on exact connector or fiber standards.
The listed offer shows a price of $10.12 from The Twister Group. The reference data does not provide a regular price, discount, stock status, shipping details, or delivery estimate. Therefore, you should view the listed price as the available offer information rather than assuming it includes additional services or guarantees.
ZoneOffer is a comparison site, not a store. Its role is to help shoppers review product information and compare available offers. You should verify the current price and other purchase details on the relevant seller’s listing before making a decision.
Price matters, but it should not be the only filter. A lower-cost cable that uses the wrong connectors is not a bargain; it is simply an expensive detour. Connector compatibility, fiber specification, length, cable rating, and warranty should all be considered together.
The category supplied for this listing is Printer Duplexers, yet the product description identifies the ICC ICFOJ9C303 as a fiber optic jumper. A conventional printer duplexer is generally associated with automatic two-sided printing, while this product’s “duplex” wording refers to its paired fiber configuration.
This difference is important for searchers. If you need an accessory that helps a printer print on both sides of a sheet, the listed product description does not support that use. If you need an SC-to-ST duplex multimode fiber jumper, however, the product details are relevant to that type of connection.
When product categories and descriptions appear different, read the technical specifications carefully. The description is often the clearest window into what the item actually is. In this case, the available information points to a network fiber cable rather than a paper-handling printer accessory.
This product may suit someone who needs a 62.5/125 M duplex multimode fiber jumper with SC-to-ST connectors and an approximately 9.8-foot length. It could be worth comparing when those specific requirements match an existing network installation.
It may also appeal to buyers who value the listed 3-year warranty, OFNR riser rating, and RoHS compliance information. These features do not eliminate the need for compatibility checks, but they can help distinguish one cable from another during the selection process.
You should consider another option if your equipment requires different connectors, a different multimode specification, a longer or shorter length, or a different cable rating. You should also look elsewhere if your goal is a printer accessory for automatic two-sided paper printing, since the supplied description does not identify this item as that type of product.
Before you proceed, confirm the connector on each device, the required fiber specification, and the distance between connection points. Then review the listed offer details, including the $10.12 price, seller name, and 3-year warranty information.
Because availability and shipping information are not included in the reference data, do not assume the item is currently in stock or that delivery terms follow a particular schedule. Verify those details through the applicable listing.
Finally, keep your expectations aligned with the product description. This is presented as a fiber optic jumper with SC-to-ST connectors, not as a general-purpose cable for every networking situation. The more precisely you match the cable to your equipment, the less likely you are to face installation surprises.
The ICC ICFOJ9C303 is listed as a 3-meter, approximately 9.8-foot duplex multimode fiber optic jumper with SC-to-ST connectors, 62.5/125 M fiber, an OFNR riser rating, and a 3-year warranty. Its listed price is $10.12 from The Twister Group. The key to choosing it is compatibility: verify the connector types, fiber specification, cable length, and installation requirements before buying. Since ZoneOffer is a comparison site rather than a store, confirm current offer details with the relevant seller and use the product description—not just the category name—to guide your decision.