All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Loading...
Think of your blender or mixer as a car—without the right tires, filters, and oil you’re not getting far. Accessories like spare cups, seals, blade assemblies, and lids do more than replace worn parts; they keep performance sharp, reduce food waste, and extend the life of your appliance. If you use a personal blender for daily smoothies or run a busy kitchen with a commercial blender, the right accessory can be the difference between a smooth puree and a lumpy disaster.
When shopping for replacement parts and accessories, you’ll want options. Retailers such as Walmart carry a mix of OEM parts and aftermarket replacements, ideal for many household and light-commercial needs. Specialist brands like Cerqular focus on portable blender extras—spare cups, rubber seals, spout tops, and travel cases—perfect for on-the-go users. For heavy-duty or restaurant-grade parts, look to appliance parts suppliers and brands like Waring, Hobart, Blendtec, Vollrath, and Omcan. You can also find parts at general marketplaces like Amazon or at appliance parts dealers that stock OEM assemblies.
Portable blenders are convenient, but the most-used components wear out fastest. Stocking a handful of basic accessories keeps your routine uninterrupted.
Spare BPA-free cups and leak-proof lids are the simplest upgrades you can buy. They typically come in sizes around 12 to 20 ounces and are great if you frequently blend recipes with different volumes or share a device among family members. Having an extra cup ready means you can blend one drink while another sits in the fridge—handy for morning rushes.
Blade covers prevent accidental cuts and protect threads and seals during storage. Travel cases keep the whole unit together and reduce the chance of dropping or scratching your blender when you’re commuting or traveling. If you carry your blender to the gym or office, a padded travel case could save you from replacing parts later.
Seals and gaskets often fail before any other component, especially if exposed to acidic ingredients or extreme heat. Replacing a worn rubber seal is inexpensive compared to the cost of a new motor or pitcher. Look for seals specified for your model and measure the inner diameter in inches before ordering to ensure a snug fit.
Countertop and commercial blenders demand rugged, precise parts. The right accessories keep consistent output when you’re blending soups, sauces, or high-volume smoothies.
Pitchers come in glass, BPA-free plastic, and heavy-duty polycarbonate. Commercial jars often range from 48 to 90 ounces, depending on capacity needs. Pick a jar material that resists staining and odor retention for the ingredients you use most—polycarbonate for durability, glass for stain resistance.
Blade assemblies get blunt and bent from frequent use. OEM blade assy replacements restore cutting efficiency and can improve motor strain. Specialty components like Vollrath's dice blades or Blendtec’s 4-sided jars with soft lids offer specific functions—dicing, processing, or tamper-free blending—that are useful in a commercial setting.
Soft lids reduce splatter and also help extract air pockets for smoother blends. Commercial kitchens often use multi-packs of soft lids so a clean one is always at hand; Blendtec sells multi-packs of soft lids geared to heavy use. A good lid protects both the operator and your ceilings.
Stand mixers are a different animal but closely related. Accessories like spiral dough hooks, wire racks, and specialty paddles change what the machine can do.
For bakery applications, the right hook saves time and preserves dough structure. Spiral hooks—used on heavy mixers like Hobart models—knead more efficiently than straight hooks and reduce motor strain. If you bake frequently, investing in a genuine hook made for your mixer in the correct size is worth every penny.
Wire racks and attachment holders keep your workspace tidy and accessories within reach. In busy kitchens, racks sized to hold mixer heads and spare bowls can make cleanup and prep faster, saving minutes that add up across a shift.
Choosing between OEM (original equipment manufacturer) and aftermarket parts often comes down to cost, availability, and risk tolerance. OEM parts—like those listed for Waring, Hobart, and Blendtec—are made to exact standards for fit and performance, which reduces compatibility headaches. Aftermarket parts can save money but may vary in quality or longevity. If you need a component that bears high stress—such as a blade assembly—consider OEM first. For low-pressure items like travel lids or cups, high-quality aftermarket options are usually acceptable.
Picking the wrong replacement is a common mistake. Use this checklist to make sure you order the right gear every time.
Look for the model number stamped on your appliance or in the manual and match it to the part code. Retailers and parts suppliers often list compatible model numbers for items like blade assy pitcher parts and OEM replacement elements—double-check before buying.
Always measure in inches when checking compatibility. Measure inner and outer diameters of seals in inches, the height and diameter of pitchers in inches, and blade shaft lengths in inches. A variance of even a quarter inch can mean a part won’t seat correctly.
Some seals and cups are rated for hot liquids up to specific temperatures—confirm the maximum temperature in Fahrenheit. For plastic pitchers, ensure they are BPA-free and check whether they’re dishwasher-safe if that’s important to you.
Replacing most accessories is straightforward, but a careful approach keeps you safe and your appliance intact.
Always unplug your blender or mixer before swapping blades or opening the bottom housing. Motors and blades can retain heat; let the unit cool for a few minutes if it was recently used. Safety first—this only takes a minute and reduces the risk of injury.
For blade assemblies and bolted parts, use the correct wrench or tool and avoid over-tightening. Over-torquing can warp the blade seating or strip threads, while under-tightening risks leaks. If your manual recommends a torque range, follow that guidance using a small torque wrench if needed.
Simple habits keep parts working longer. Rinse seals, lids, and cups immediately after use to prevent stains and odor build-up. For blade assemblies, hand wash carefully with a brush to remove trapped food—many blade assemblies are sharp and should not be placed loosely in a dishwasher because they can dull or cause damage when tossed with other items.
Deciding between replacing a part or buying a new blender depends on cost, age, and performance. If a replacement part costs more than half the price of a new comparable unit, and your appliance is older than three to five years, a new purchase might be more cost-effective. On the other hand, replacing a damaged seal, blade, or pitcher is often cheaper and more sustainable when the motor and electronics are in good shape.
For rare or commercial-grade parts, look beyond big-box retailers. Parts suppliers serving restaurants and bakeries stock Hobart, Omcan, and Vollrath items such as spiral hooks, dough arms, and specialized blades. eBay and Amazon can have discontinued OEM parts, but verify seller ratings and part numbers. Walmart carries a broad range of replacement items, from Waring OEM parts to Blendtec accessories. Cerqular specializes in portable blender add-ons—ideal for consumers who want extra cups, seals, and carrying cases.
Accessories come in many price tiers. Expect to pay around $5 to $25 for small items like seals, lids, and travel cups. Blade assemblies and OEM pitcher replacements typically range from $20 to $150 depending on brand and whether the piece is commercial-grade. Heavy-duty mixer attachments like spiral dough hooks or planetary gears for commercial mixers can be $50 to several hundred dollars. Planning for regular replacements—especially seals and lids—lets you budget smartly and avoid downtime.
When shopping online, read product specs closely: dimensions in inches, compatible models, and material details. Reviews often reveal if a part fits as advertised or fails prematurely. Check the seller’s return or warranty policy before buying—manufacturers often provide limited warranties on OEM parts, which can be a helpful safety net.
Extending the life of your blender with replacement parts is generally more eco-friendly than replacing the entire appliance. When a plastic cup or gasket finally reaches the end of its useful life, see if the manufacturer or a local recycling center accepts its material. Choosing durable, repairable accessories reduces waste and saves money over time.
Before checking out, confirm these five things: model compatibility, measurements in inches, material suitability, whether the part is OEM or aftermarket, and any warranty coverage. This short checklist will save you the frustration of returns and get you back to blending faster.
Whether you’re a smoothie fanatic, a home baker, or manage a commercial kitchen, the right accessories unlock better performance and longer equipment life. From Cerqular’s portable blender extras to Walmart’s range of OEM and compatible parts, the market has what you need—just measure carefully, prioritize safety, and pick the right balance of cost and quality.
Conclusion: Investing a little time and the right accessories keeps your blender and mixer running like new. A few spare cups, a fresh seal, or a genuine blade assembly can save you time, money, and frustration—making every blend smoother and every bake more consistent.
| $ 259,20 |
| Robot Coupe 59204- Genuine Oem Replacement Part | $ 281,53 |
| Hobart 00-893054 Piping Chamber Input | $ 788,75 |
