Parameters: suction: 100-120 n cm2 size: 10x20 inch use of ambient temperature: -40 -50 safety factor: 3.5 Product weight: 83.6Lb 38kg grinding angle: 0-45 thickness: 1.77Inch 45 mm method of use put the workpiece on the suction table and then insert the wrench into the shaft hole to turn clockwise180 the workpiece can be sucked for processing. The workpiece is completed the wrench can be inserted into the shaft hole to turn counterclockwise 180 you can remove the workpiece maintenance sucker should be wiped clean before use to avoid scratching the surface after using the surface should be coated with oil to prevent corrosion. Use of ambient temperature: -40 -50 . Do not knock to prevent magnetic reduction. Strong dense pole permanent magnet sucker is for surface grinder sparks machine wedm. Very fine spacing uniform magnetic distribution particularly for processing small thin parts. Worktable precision no change while magnetizing and demagnetizing. Panel with special treatment no leakage to prevent corrosion of cutting fluid. To prolong service life of the disk it can be placed on the cutting fluid for storage. Six-surface fine grinding processing the sucker can be used in vertical direction on the wire cutting machine cutting. High-performance magnetic steel disk with suction almost no remanence. Item included 170428 : techtongda magnetic chuck and accessories
Parameters: suction: 100-120 n cm2 size: 10x20 inch use of ambient temperature: -40 -50 safety factor: 3.5 Product weight: 83.6Lb 38kg grinding angle: 0-45 thickness:...show more
