Parameters: size: 16 *24 40*60cm voltage:110v power: 1800w time range: 0s-999s max temp: 0-250 482 package size:27.95*27.17*16.14In gross weight: 69.63Lb using method: 1.Set pressure adjust pressure at the top of the tray in a clockwise direction to increase pressure and in the opposite direction to decrease by turning the knob. 2.Set temperature&time press on the on off switch located on the side of the heat press to be energized. Press once on the ok screen show p-1 on the display. Press or to the desired temperature. Press once again on ok screen show p-2 on the display. Press or to the desired time. Press ok again after finish all setting to come out setting mode. Put objects when the machine has reached the desired temperature close heating plates waiting time. When times up machine will ringing then lift heating plates take out printing items. Please comply with these instructions: 1. Do not put the wire on heating plates cover. 2. Do not touch heating plates when heating up. Caution: risk of burns. 3. Do not open the machine box and make changes to the device. 4. Do not allow liquid or metal objects inside the hot press. 5.Make sure the machine is connected with a plug connected to the mass. 6.Power off the machine when finish using. Item included 003450 : techtongda 110v manual 16 *24 sublimation transfer heat press machine
