View 4 Offers
Loading...
The right humidifier accessory can make respiratory therapy more comfortable, consistent, and easier to maintain. A chamber helps add moisture to delivered air, an adapter connects compatible equipment, and a heat and moisture exchanger can support humidification in specific breathing systems. But which accessory fits your setup?
This guide explores the humidifier accessories listed in the reference data, including Fisher & Paykel chambers, Teleflex sterile-water products, mask interfaces, tubing adapters, and heat and moisture exchangers. ZoneOffer is a comparison site, so the listed information helps you compare products and prices rather than purchase directly from ZoneOffer.
Dry air can feel uncomfortable during respiratory therapy. Humidification adds moisture to the airflow, which may help reduce dryness and irritation in the respiratory tract. The accessory is often the bridge between the humidifier and the patient: if that bridge is incompatible, the entire setup may perform poorly.
Think of a respiratory system as a small team. The humidifier provides the moisture, the chamber holds or manages the water, and the tubing or adapter helps move the conditioned air where it needs to go. Each component has a role, so matching the accessory to the equipment is essential.
The products in this category are not all interchangeable. Some are designed for specific Fisher & Paykel systems, while others are intended for Teleflex equipment or particular respiratory configurations. Always check the model information and follow guidance from a qualified healthcare professional before selecting a replacement.
Humidification chambers are among the most common accessories in the reference data. They are designed to hold water and work with a compatible humidifier, helping provide moisture to the air delivered during therapy.
The Fisher & Paykel reusable humidification chamber kit, brand code FPHC300-Each, includes a chamber, a 24-inch inlet tube, and a chamber connector. It is described as reusable and designed for Fisher & Paykel respiratory equipment. The components can be disassembled for cleaning and maintenance. The listed price is $121.58, with a regular price of $147.90 shown in the reference data.
For a single-use option, the Fisher & Paykel adult humidification chamber, brand code FPMR250-Each, is designed for adult patients and manual filling. Its disposable design supports hygiene and infection-control routines. The listed price is $15.60.
The Vented Autofeed Adult Infant Humidification Chamber appears in both case and individual versions. Both listings describe automatic refilling to maintain a consistent water level, compatibility with MR-series humidifiers, and a dual-float design intended to support safety and stable operation. The individual listing is $23.26, while the case listing is also shown at $23.26 in the supplied data. The case listing carries brand code FPMR290V-Case, and the individual listing carries FPMR290V-Each.
Compatibility should come before price. A chamber that looks similar to your current one may still use different ports, connectors, or heating requirements. Start by identifying the humidifier model and then compare it with the product description and brand code.
The Fisher & Paykel 900ICON200 humidification chamber is described for Premo, Novo, and Auto models in the ICON series. It has a non-disassemble design and is dishwasher safe according to the listing. Its listed price is $47.12.
For the HC600 series, the Fisher & Paykel FPHC365S-Box chamber is described as a standard chamber with a 600-milliliter capacity, equivalent to about 20.3 U.S. fluid ounces. It is intended for HC600 humidified CPAP systems and works with heating elements to help maintain temperature and humidity. The listed price is $22.62.
The Fisher & Paykel replacement chamber with brand code FPHC325S-Each is described for use with the 900HC105 system. It has a 480-milliliter capacity, or approximately 16.2 U.S. fluid ounces, and two ports. Its listed price is $16.96, compared with a regular price of $18.68.
For HC200 equipment, the FPHC385S-Box chamber is described as a replacement chamber that adds moisture to delivered air and works with HC200 heating elements. It requires regular cleaning and water refilling. The listed price is $16.38.
An autofeed chamber is designed to reduce the need for repeated manual refilling. The Vented Autofeed Adult Infant Humidification Chamber uses an auto-fill function to help maintain a consistent water level. That can be useful in systems where stable humidification is important.
The product description also notes an open vent design that accommodates rigid or semi-rigid water bottles. Its dual-float mechanism is intended to support patient safety and steady water management. However, compatibility remains the key consideration because the chamber is described for MR-series humidifiers.
When comparing the case and individual listings, pay attention to the brand code and packaging description. A product labeled “Each” generally indicates an individual unit in the listing, while “Case” may indicate case packaging. Because packaging details can vary, confirm the exact quantity before making a decision.
The reference data also includes several Teleflex products for humidification and water management. These products range from disposable chambers to sterile-water reservoirs and prefilled humidifiers.
The Teleflex Conchatherm 2000 CPAP humidification chamber, brand code 9250025-Pack(age), is described as disposable and suitable for single-patient use. It includes an easy-fill port that allows refilling without removing the tubing. The listing also mentions a removable threaded stainless-steel base, adjustable heater control, and an interchangeable design. Its listed price is $45.52.
The Conchapak sterile water reservoir is listed with a 1,650-milliliter capacity, or approximately 55.8 U.S. fluid ounces, at $11.25. A regular price of $14.34 is also shown. Another listing combines a Conchapak sterile-water reservoir and a Concha-column with a standard column and right-angle port. That product is also described as holding 1,650 milliliters, or about 55.8 U.S. fluid ounces, and is listed at $19.20.
These products are not simply generic water containers. Their descriptions identify specific reservoir, column, or humidification applications. Before choosing one, compare the port style and equipment requirements with your existing respiratory system.
Prefilled sterile-water products can simplify setup by combining the water supply with a humidification component. The reference data includes several Teleflex Aquapak products in different capacities.
The Teleflex Aquapak prefilled humidifier with sterile water is listed in a 340-milliliter size, or approximately 11.5 U.S. fluid ounces, for $5.31. Another Aquapak listing provides 440 milliliters, or about 14.9 U.S. fluid ounces, for $8.29.
The Aquapak sterile water with a humidifier adapter is listed at 540 milliliters, equivalent to approximately 18.3 U.S. fluid ounces, for $4.54. The product description identifies it as sterile water with a 000-40 humidifier adapter.
A further Aquapak listing provides 650 milliliters, or about 22 U.S. fluid ounces, with a 000-40 humidifier adaptor. It is listed at $6.25. Another product, listed at $4.59, describes sterile water with a sterile humidifier adapter and an audible alarm when flow is restricted. It is listed at 640 milliliters, or approximately 21.6 U.S. fluid ounces.
When comparing these options, capacity is only one factor. You should also look at the adapter specification, whether the water is prefilled, and whether the product matches the humidifier being used. Bigger is not automatically better if the connection is wrong.
Heat and moisture exchangers, sometimes called HMEs, are another important accessory type. The reference data includes two Teleflex Humid-Vent products.
The Teleflex Humid-Ventfilter Light Straight heat and moisture exchanger has a tidal-volume range listed from 250 to 1,500 milliliters, which is approximately 8.5 to 50.7 U.S. fluid ounces. Its dead space is listed as 60 milliliters, or about 2 U.S. fluid ounces. The product is described as latex-free and is listed at $6.08.
The Teleflex Humid-Vent2S Flex heat and moisture exchanger is listed for the same 250-to-1,500-milliliter range, or roughly 8.5 to 50.7 U.S. fluid ounces. Its dead space is listed as 54 milliliters, equivalent to about 1.8 U.S. fluid ounces. The description mentions a transparent housing and high moisture output meeting ISO 8185 standards for active humidifiers. Its listed price is $5.65, compared with a regular price of $6.86.
Because HME specifications relate to breathing-system performance, these products should be selected according to clinical guidance and equipment requirements. A lower listed price should never outweigh proper fit and suitability.
Adapters may be small, but they can be the crucial link in a humidification setup. The Concha tubing adaptor, narrow bore, brand code 9238400-Each, is listed at $3.50, compared with a regular price of $4.61.
The Fisher & Paykel Optiflow humidifier mask interface adapter is available in two listings. The individual version, brand code FPOPT980-Each, is described as a 22-millimeter outside-diameter Optiflow mask interface adapter and is listed at $47.59. The other listing, brand code FPOPT980-Pack(age), includes the adapter with a mask and is listed at $951.76. The reference data also shows a regular price of $951.76 for the individual listing, so shoppers should carefully verify the exact package and pricing details before comparing the two.
The Oracle oral interface mask with standard and small SoftSeal options is designed for CPAP or bi-level therapy and includes headgear for optional use. Its listed price is $160.49. This is an interface product rather than a water chamber, so it serves a different purpose in the overall therapy setup.
Maintenance is part of humidifier performance. Several product descriptions specifically mention cleaning, refilling, or disassembly. The 900ICON200 chamber is described as dishwasher safe, while the reusable FPHC300 kit is designed to be disassembled for cleaning.
Other products, such as the HC600 and HC200 chambers, require regular cleaning and water refilling according to their listings. Single-use chambers follow a different routine because they are designed for disposal rather than long-term reuse.
Use only the cleaning and maintenance process recommended for your equipment. A chamber may look clean on the outside while still needing attention around ports, connectors, or water-contact areas. Keep a simple schedule, inspect components for damage, and replace accessories according to professional guidance.
ZoneOffer helps you compare product information from available listings; it is not a store. To compare effectively, begin with the exact product title, then check the brand code, compatibility notes, package type, and listed price.
Price comparisons can be useful, but they need context. For example, a reusable kit may cost more than a single-use chamber because it includes multiple components and is designed for repeated use. A prefilled sterile-water product may be more convenient than a separate reservoir, while a basic adapter may be less expensive because it serves a narrower function.
Also watch for duplicate or similar listings. The reference data includes multiple versions of the Vented Autofeed chamber and more than one Optiflow adapter listing. Comparing the package description prevents a frustrating mismatch—like ordering a key when you actually need the lock.
For a Fisher & Paykel ICON-series setup, the 900ICON200 chamber is the listing specifically associated with Premo, Novo, and Auto models. For HC600 equipment, the FPHC365S-Box is identified as a 600-milliliter chamber. For HC200 equipment, the FPHC385S-Box is the product described for that system.
If you need a reusable Fisher & Paykel kit, the FPHC300-Each includes the chamber, inlet tube, and connector. If you need an individual adult single-use chamber, the FPMR250-Each listing is the relevant option. For MR-series systems, the FPMR290V listings describe an autofeed chamber with a dual-float mechanism.
For Teleflex equipment, the reference data includes Conchatherm chambers, Conchapak reservoirs, Aquapak sterile-water products, and Humid-Vent heat and moisture exchangers. Each product has a different role, so the model and connection requirements should guide your choice.
Humidifier accessories are small components with an important job. Chambers manage water and moisture, adapters create secure connections, sterile-water products simplify setup, and heat and moisture exchangers support specific respiratory configurations. By checking compatibility, capacity, package details, maintenance needs, and listed prices, you can make a more informed comparison on ZoneOffer. Always confirm the correct accessory with your equipment documentation or healthcare professional before use.
