What should I check first when buying an actuator?

Start with voltage, stroke length, application and mounting arrangement. The Lenco products in this selection show why voltage and stroke matter: one is listed at 24 volts with a 2.25-inch stroke, while another is listed at 12 volts with a 4.25-inch stroke.

Are the listed trailer brake assemblies interchangeable?

No. The listed assemblies differ by axle rating, brake dimensions and side orientation. The AP Products 014-122258-B-12 is a left-hand assembly for 3,500-pound axles, while the AP Products 014-122451 is a right-hand assembly for 4,000- to 7,000-pound axles.

How do the two Dexter hub rotors differ?

The Dexter 12-inch hub rotor is listed for 6,000-pound axles and has a 6-by-5.5-inch bolt pattern. The Dexter 10-inch hub rotor is listed for 3,500- to 3,700-pound axles and has a 5-by-4.5-inch bolt pattern.

High-Performance Armatures, Rotors & Stators

Armatures, Rotors & Stators	Price
Elic Excavator Tractor 24v Solenoid Valve 24vdc 186-1526 3e-6269 3e6269 1861526	$40.00
Hollow Shaft Brake Hollow Controller Hollow Shaft Electromagnetic Powder Motor Brake	$150.00
Lenco 15061-001 24v 2 1 4 Inch Stroke Actuator With 6ft Wire	$264.12
Lenco 15059-001 102 Series Standard Actuator - 12v	$265.12

Armatures, Rotors & Stators: A Practical Buying Guide for Marine, Trailer and Electrical Projects

When a motor, trailer brake, steering system or marine control begins to struggle, the right replacement component can make all the difference. Armatures, rotors, stators, actuators, hubs and related electrical parts work behind the scenes, but they are often the heart of reliable equipment. Choosing the wrong size or voltage is like fitting the wrong key into a lock: it may look close, but it will not do the job properly.

This guide reviews the products listed in the reference data and explains how to compare them. The selection includes marine propellers, steering and throttle actuators, trailer brake assemblies, brake hubs, hub rotors, an electronic control unit, a solenoid valve, an aerator and a replacement motor arm. Prices shown are the listed comparison prices at the time of writing. ZoneOffer is a comparison site, not a store, so shoppers should verify fitment and product details before purchasing.

What Are Armatures, Rotors and Stators?

Armatures, rotors and stators are common parts in electric motors and electromechanical systems. The armature is generally the moving electrical component that helps convert electrical energy into motion. A rotor is the rotating element, while a stator remains stationary and creates or guides the magnetic field around the rotor.

Not every product in this selection is a traditional armature or stator. However, the products share a useful connection: they support powered movement, control, braking, steering or water circulation. That makes correct specifications especially important. Voltage, stroke length, mounting style, axle rating, bolt pattern and operating temperature can all affect compatibility.

Why specifications matter

A component can have an attractive price and still be unsuitable for your equipment. For example, a 12-volt actuator is not automatically interchangeable with a 24-volt model. Likewise, a trailer brake assembly designed for a 3,500-pound axle should not be treated as a direct replacement for one intended for a 7,000-pound axle.

Before comparing offers, write down the old part number, voltage, dimensions, side orientation and equipment model. Think of this as creating a shopping “map.” It helps you avoid wandering toward a product that looks similar but has a different job.

Marine Propeller and Control Components

The marine products in this selection focus on propulsion, steering, throttle control and trim adjustment. These components are designed for different systems, so they should be compared by function rather than appearance.

Turning Point 21431530 aluminum propeller

The Turning Point 21431530 LE1 LE2-1315-4 Hustler aluminum right-hand propeller is listed with a 13.5-by-15-inch specification and four blades. The offer is shown under the TURNING POINT brand at $110.12 from The Twister Group.

A four-blade propeller may appeal to someone comparing marine propulsion options where blade count and stated dimensions matter. The right-hand rotation designation is also important because it identifies the intended turning direction. Before buying, compare the propeller’s 13.5-by-15-inch specification with your existing setup and confirm that the right-hand configuration is correct.

Garmin Reactor 40 steering actuator

The Garmin 010-12826-00 steering actuator is described for Reactor 40 Kicker autopilots and a tilt-tube mount. Its listed operating temperature range is from -20 to 70 degrees Fahrenheit. The price shown is $915.12 from The Twister Group.

This is a specialized product rather than a general-purpose motor part. Its compatibility description names the Reactor 40 Kicker autopilot system, so buyers should treat that information as central to the decision. A steering actuator must connect correctly to the steering arrangement; a small mismatch can affect installation and operation.

Garmin throttle actuator for Reactor 40 Kicker systems

The Garmin 010-12827-00 throttle actuator is also listed for Reactor 40 Kicker autopilots. It is designed for installation under the engine cover and is described with a 0-to-70-degree Fahrenheit operating range, a 6-inch length, a 2.5-inch width and a 1.1-inch depth. The listing also states an IPX7 rating and identifies the unit as waterproof and black. Its listed price is $297.12 from The Twister Group.

These dimensions can help you assess available space before ordering. Measure the intended mounting area rather than relying on a visual estimate. The actuator’s specified operating range and IPX7 rating may also be relevant when comparing it with other components for a marine environment.

Marine Actuators for Trim and Position Control

Actuators convert electrical power into controlled movement. In marine applications, they can adjust trim systems or move equipment through a defined stroke. When comparing actuators, pay close attention to voltage, stroke length, wire length and the intended application.

Lenco 15061-001 24-volt actuator

The Lenco 15061-001 is listed as a 24-volt actuator with a 2.25-inch stroke and a 6-foot wire. The product is offered under the Lenco brand at $264.12 from The Twister Group.

The 24-volt rating immediately separates this model from the 12-volt actuators in the same selection. Its 2.25-inch stroke describes the travel distance, while the 6-foot wire may influence installation planning. Measure the distance between the actuator and its connection point so you can determine whether the supplied wire length is appropriate for your project.

Lenco 15059-001 102 Series standard actuator

The Lenco 15059-001 102 Series standard actuator is listed as a 12-volt model with a 4.25-inch stroke. Its listed price is $265.12 from The Twister Group.

Compared with the Lenco 15061-001, this unit uses a lower voltage and provides a longer stated stroke. Those differences are not minor details; they define how the actuator should be matched to the electrical system and the movement required. Confirm both the power supply and the required travel before selecting it.

Lenco 15057-001 short extreme-duty actuator

The Lenco 15057-001 101XDS Short Extreme Duty Actuator is listed as a 12-volt unit with a 2.25-inch stroke and 5/16-inch hardware. It is shown at $265.12 from The Twister Group.

This model may be worth comparing when a shorter stroke and stated extreme-duty design are more suitable than a longer-travel actuator. The included hardware specification is useful for installation planning. Still, you should verify that the mounting arrangement and hardware size match your existing equipment.

Bennett Marine adjustable electric actuator

The Bennett Marine BEA3000 is described as an adjustable electric actuator for Bolt. The listing shows a price of $189.12 from The Twister Group.

Because the product is specifically identified for Bolt, buyers should compare that application with their own marine system. “Adjustable” can be valuable when precise positioning is needed, but it does not replace the need to confirm voltage, mounting points and system compatibility.

Trailer Brake Assemblies and Hub Components

Trailer brake parts are another major group in the reference data. These products are identified by axle capacity, brake size, side orientation and hub dimensions. Matching those details is essential for safe and dependable installation.

AP Products electric brake assembly for 3,500-pound axles

The AP Products 014-122258-B-12 electric brake assembly is listed for 3,500-pound axles. It replaces a complete electric 10-by-2.25-inch trailer brake and is identified as a left-hand assembly. The listed price is $54.12 from The Twister Group.

The left-hand designation matters because trailer brake assemblies are often side-specific. The 10-by-2.25-inch brake size and 3,500-pound axle reference provide additional checkpoints. The listing itself says to verify fitment before purchasing, so use those details as a starting point for comparison rather than assuming universal compatibility.

AP Products right-hand brake assembly

The AP Products 014-122451 12BRAKEASSYRHBOXED is listed as a right-hand complete electric trailer brake assembly. It fits 4,000-pound to 7,000-pound axles and replaces a 12-by-2-inch electric trailer brake. The listed price is $69.12 from The Twister Group.

This product differs from the previous AP Products assembly in axle range, brake dimensions and side. If your trailer uses a right-hand assembly for an axle rated between 4,000 and 7,000 pounds, these specifications may help narrow the search. Always compare the existing brake size and axle rating before ordering.

AP Products 3,500-pound brake hub

The AP Products 014-126003 brake hub is listed for 3,500-pound applications. It has a 5-by-4.5-inch bolt pattern, a 0.5-inch stud diameter and a 6.7-inch hub face diameter. The listed price is $62.12 from The Twister Group.

Hub measurements need to align with the trailer’s wheel and axle arrangement. A bolt pattern that is only slightly different may prevent proper installation. Record the existing bolt pattern, stud diameter and hub face measurement before comparing this product with other options.

Dexter Hub Rotors for Disc Brake Systems

Hub rotors combine hub and rotor functions in one assembly. They can simplify replacement when both the mounting hub and braking surface need attention. The two Dexter products listed here are separated by axle range, rotor size and bolt pattern.

Dexter Kodiak 12-inch hub rotor

The Dexter 008-R H-12-D-S Kodiak hub rotor is described as a Gal-Dex replacement for Dexter 6,000-pound axle disc brakes. It is a vented 12-inch outside-diameter rotor with a 6-by-5.5-inch bolt pattern. The listed price is $98.12 from The Twister Group.

The vented design and 12-inch outside diameter are key identifying details. So is the 6-by-5.5-inch bolt pattern. Compare all three specifications with your current rotor before purchase, especially if you are replacing a component on a heavier trailer axle.

Dexter Kodiak 10-inch hub rotor

The Dexter 008-R H-10-D-S Kodiak hub rotor is listed as a Gal-Dex replacement for Dexter 3,500- to 3,700-pound axle disc brakes. It has a vented 10-inch outside diameter and a 5-by-4.5-inch bolt pattern. The listed price is $89.12 from The Twister Group.

This model is smaller than the 12-inch hub rotor and is intended for a different axle range. The 5-by-4.5-inch bolt pattern further distinguishes it. Comparing axle rating, rotor diameter and bolt pattern together is the best way to avoid confusing the two Dexter products.

Additional Electrical and Motor-Related Components

The remaining products cover motor accessories, control electronics, braking technology, hydraulic-style control and water circulation. They may not all be armatures or stators in the strictest technical sense, but they belong to the wider world of powered equipment components.

Schmitt & Ongaro replacement motor arm

The Schmitt & Ongaro 33680 replacement arm is listed for a standard motor and includes an adjustable 10.5- to 14-inch range. It is a 12-volt component priced at $24.12 from The Twister Group.

This is one of the lower-priced products in the selection, but fit remains the priority. Confirm that your existing motor uses the standard arrangement described in the listing and compare the adjustable length range with the space available on your equipment.

Garmin ECU 10 for Reactor40

The Garmin 010-11053-02 ECU 10 is listed for Reactor40 systems. Its listed price is $658.12 from The Twister Group.

An electronic control unit acts as a coordinating component in a powered system. Since this product is identified specifically for Reactor40, the system name should be the first compatibility check. Compare the part number directly with your existing unit or equipment documentation.

Electromagnetic powder motor brake

The hollow-shaft brake is described as a hollow-shaft electromagnetic powder motor brake. The listing shows a price of $150 from Alibaba and includes promotional wording about new products and potential savings, but it does not provide a brand, detailed dimensions or a specific operating voltage.

That means the available information is more limited than for the marine and trailer products. If you are considering it, request or verify the missing technical details before making a decision. Hollow-shaft dimensions and electrical requirements are especially important for installation.

Elic 24-volt solenoid valve

The Elic excavator tractor solenoid valve is listed as a 24-volt DC component with the identifiers 186-1526, 3E-6269 and 3E6269. Its listed price is $40 from Alibaba.

Multiple part identifiers can help when cross-checking an existing valve. Confirm the identifier, voltage and equipment application before comparing this product with another solenoid valve. A 24-volt DC component should not be assumed compatible with a different electrical system.

Albin 12-volt aerator cartridge

The Albin 01-05-076 cartridge twin-port aerator is listed as a 12-volt DC unit. It is described with an output of 1,100 gallons per hour and 1,000 gallons per hour at a 3-foot head. The unit has a 1.125-inch NPT inlet and outlet port, and listed dimensions of 2.5 inches in length, 3.8 inches in width and 5.7 inches in height. Its price is $32.12 from The Twister Group.

This product is a useful example of why performance and physical fit should be considered together. The flow figures describe different operating conditions, while the port size and body dimensions help with installation planning. Compare the pump area, plumbing and available space before selecting it.

How to Compare Prices on ZoneOffer

ZoneOffer lets you compare listed products and prices in one place, but it is not the seller. The offers in this selection come from The Twister Group or Alibaba, and the listed prices range from $24.12 for the Schmitt & Ongaro replacement arm to $915.12 for the Garmin steering actuator.

Price alone is not the whole story. A lower-cost part may have different dimensions, voltage or application limits. Start with compatibility, then compare price among products that genuinely match your equipment. This approach is similar to comparing shoes: the cheapest pair is not a bargain if it is the wrong size.

A simple comparison checklist

Check the brand and part number first. Next, confirm voltage, dimensions, stroke, axle rating, bolt pattern, side orientation and operating temperature where applicable. For marine products, also compare the named system or application. Finally, review the offer details on the seller’s page before purchasing because product information can change.

Installation and Fitment Considerations

Many of these parts are technical replacements, so careful preparation matters. Disconnect power before working on electrical components, and use the old part as a reference for orientation and mounting. For trailer brake and hub components, confirm axle capacity and dimensions rather than relying on the trailer’s general appearance.

Marine actuators and control components may require precise mounting and system-specific connections. Measure twice, record the part number and compare the listed specifications line by line. If a listing says to verify fitment, take that instruction seriously.

Choosing the Right Product for Your Project

For marine propulsion, compare the Turning Point propeller by blade count, rotation and size. For autopilot steering or throttle control, focus on the Garmin Reactor 40 compatibility details. For trim movement, compare Lenco and Bennett Marine actuators by voltage, stroke and application.

For trailers, begin with axle rating and brake side, then verify brake or rotor dimensions and bolt pattern. For broader electrical projects, examine the exact part identifiers and missing specifications carefully. The best product is not necessarily the most expensive or least expensive; it is the one whose details line up with the equipment in front of you.

Conclusion

The armatures, rotors, stators and related powered components in this comparison cover a wide range of marine, trailer and equipment needs. From the $24.12 Schmitt & Ongaro replacement arm to the $915.12 Garmin steering actuator, each product should be judged by its specifications and intended application. Use ZoneOffer to compare the listed options, verify every measurement and electrical requirement, and confirm fitment with the seller before completing your purchase.

Armatures, Rotors & Stators

Armatures, Rotors & Stators	Price
Elic Excavator Tractor 24v Solenoid Valve 24vdc 186-1526 3e-6269 3e6269 1861526	$40.00
Hollow Shaft Brake Hollow Controller Hollow Shaft Electromagnetic Powder Motor Brake	$150.00
Lenco 15061-001 24v 2 1 4 Inch Stroke Actuator With 6ft Wire	$264.12
Lenco 15059-001 102 Series Standard Actuator - 12v	$265.12

Armatures, Rotors & Stators: A Practical Buying Guide for Marine, Trailer and Electrical Projects

What Are Armatures, Rotors and Stators?

Why specifications matter

Marine Propeller and Control Components

Turning Point 21431530 aluminum propeller

Garmin Reactor 40 steering actuator

Garmin throttle actuator for Reactor 40 Kicker systems

Marine Actuators for Trim and Position Control

Lenco 15061-001 24-volt actuator

The Lenco 15061-001 is listed as a 24-volt actuator with a 2.25-inch stroke and a 6-foot wire. The product is offered under the Lenco brand at $264.12 from The Twister Group.

Lenco 15059-001 102 Series standard actuator

The Lenco 15059-001 102 Series standard actuator is listed as a 12-volt model with a 4.25-inch stroke. Its listed price is $265.12 from The Twister Group.

Lenco 15057-001 short extreme-duty actuator

The Lenco 15057-001 101XDS Short Extreme Duty Actuator is listed as a 12-volt unit with a 2.25-inch stroke and 5/16-inch hardware. It is shown at $265.12 from The Twister Group.

Bennett Marine adjustable electric actuator

The Bennett Marine BEA3000 is described as an adjustable electric actuator for Bolt. The listing shows a price of $189.12 from The Twister Group.

Trailer Brake Assemblies and Hub Components

AP Products electric brake assembly for 3,500-pound axles

AP Products right-hand brake assembly

AP Products 3,500-pound brake hub

Dexter Hub Rotors for Disc Brake Systems

Dexter Kodiak 12-inch hub rotor

Dexter Kodiak 10-inch hub rotor

Additional Electrical and Motor-Related Components

Schmitt & Ongaro replacement motor arm

The Schmitt & Ongaro 33680 replacement arm is listed for a standard motor and includes an adjustable 10.5- to 14-inch range. It is a 12-volt component priced at $24.12 from The Twister Group.

Garmin ECU 10 for Reactor40

The Garmin 010-11053-02 ECU 10 is listed for Reactor40 systems. Its listed price is $658.12 from The Twister Group.

Electromagnetic powder motor brake

Elic 24-volt solenoid valve

The Elic excavator tractor solenoid valve is listed as a 24-volt DC component with the identifiers 186-1526, 3E-6269 and 3E6269. Its listed price is $40 from Alibaba.

Armatures, Rotors & Stators

Albin 01-05-076 Cartridge Twnprt Aeratr 1100 Gph12v - Aerator 1100 Gallon Per Hour And 1000 Gallon Per Hour At 3 Feet He

Garmin 010-12826-00 Steering Actuator Reactor 40 Kicke - For Reactor 40 Kicker Autopilots Tilt Tube Mount -20 To 70 Degr

Turning Point 21431530 Le1 Le2-1315-4 Hustler Aluminum - Right-hand Propeller

Elic Excavator Tractor 24v Solenoid Valve 24vdc 186-1526 3e-6269 3e6269 1861526

Hollow Shaft Brake Hollow Controller Hollow Shaft Electromagnetic Powder Motor Brake

Dexter 008-r H-10-d-s Kodiak 10ft Hub Rotor Gal-dex Replacement For Dexter 3500 To 3700 Pound Axle Disc Brake Rotor Vent

Dexter 008-r H-12-d-s Kodiak 12ft Hub Rotor Gal-dex Replacement For Dexter 6000 Pound Axle Disc Brake Rotor Vented 6 X 5

Garmin 010-12827-00 Throttle Actuator Reactor 40 Kicke For Reactor 40 Kicker Autopilots Under Engine Cover 0 To 70 Degre

Garmin 010-11053-02 Ecu 10 - Reactor40

Ap Products 014-122258-b-12 10ft Electric Brake Assemb - Fits 3500 Pound Axles Replaces Complete Electric 10 In X 2-1 4

Ap Products 014-122451 12brakeassyrhboxed Fits 4000 Pound To 7000 Pound Axles Replaces Complete Electric 12 In X 2 In Tr

Ap Products 014-126003 3.5kbrakehub545-1 2 Brake Hub 3500 Pounds 5 X 4

Lenco 15061-001 24v 2 1 4 Inch Stroke Actuator With 6ft Wire

Lenco 15059-001 102 Series Standard Actuator - 12v

Lenco 15057-001 101xds Short Extreme Duty Actuator - 12v

Bennett Marine Bea3000 Adjustable Electric Actuator For Bolt

Schmitt & Ongaro 33680 Ongaro Replacement Arm F Standard Motor Adj 10

Armatures, Rotors & Stators price list

Questions and answers about Armatures, Rotors & Stators

What should I check first when buying an actuator?

Start with voltage, stroke length, application and mounting arrangement. The Lenco products in this selection show why voltage and stroke matter: one is listed at 24 volts with a 2.25-inch stroke, while another is listed at 12 volts with a 4.25-inch stroke.

Are the listed trailer brake assemblies interchangeable?

No. The listed assemblies differ by axle rating, brake dimensions and side orientation. The AP Products 014-122258-B-12 is a left-hand assembly for 3,500-pound axles, while the AP Products 014-122451 is a right-hand assembly for 4,000- to 7,000-pound axles.

How do the two Dexter hub rotors differ?

The Dexter 12-inch hub rotor is listed for 6,000-pound axles and has a 6-by-5.5-inch bolt pattern. The Dexter 10-inch hub rotor is listed for 3,500- to 3,700-pound axles and has a 5-by-4.5-inch bolt pattern.

Armatures, Rotors & Stators: A Practical Buying Guide for Marine, Trailer and Electrical Projects

What Are Armatures, Rotors and Stators?

Why specifications matter

Marine Propeller and Control Components

Turning Point 21431530 aluminum propeller

Garmin Reactor 40 steering actuator

Garmin throttle actuator for Reactor 40 Kicker systems

Marine Actuators for Trim and Position Control

Lenco 15061-001 24-volt actuator

Lenco 15059-001 102 Series standard actuator

Lenco 15057-001 short extreme-duty actuator

Bennett Marine adjustable electric actuator

Trailer Brake Assemblies and Hub Components

AP Products electric brake assembly for 3,500-pound axles

AP Products right-hand brake assembly

AP Products 3,500-pound brake hub

Dexter Hub Rotors for Disc Brake Systems

Dexter Kodiak 12-inch hub rotor

Dexter Kodiak 10-inch hub rotor

Additional Electrical and Motor-Related Components

Schmitt & Ongaro replacement motor arm

Garmin ECU 10 for Reactor40

Electromagnetic powder motor brake

Elic 24-volt solenoid valve

Albin 12-volt aerator cartridge

How to Compare Prices on ZoneOffer

A simple comparison checklist

Installation and Fitment Considerations

Choosing the Right Product for Your Project

Conclusion

Armatures, Rotors & Stators price list

Questions and answers about Armatures, Rotors & Stators

What should I check first when buying an actuator?

Start with voltage, stroke length, application and mounting arrangement. The Lenco products in this selection show why voltage and stroke matter: one is listed at 24 volts with a 2.25-inch stroke, while another is listed at 12 volts with a 4.25-inch stroke.

Are the listed trailer brake assemblies interchangeable?

No. The listed assemblies differ by axle rating, brake dimensions and side orientation. The AP Products 014-122258-B-12 is a left-hand assembly for 3,500-pound axles, while the AP Products 014-122451 is a right-hand assembly for 4,000- to 7,000-pound axles.

How do the two Dexter hub rotors differ?

The Dexter 12-inch hub rotor is listed for 6,000-pound axles and has a 6-by-5.5-inch bolt pattern. The Dexter 10-inch hub rotor is listed for 3,500- to 3,700-pound axles and has a 5-by-4.5-inch bolt pattern.

Armatures, Rotors & Stators: A Practical Buying Guide for Marine, Trailer and Electrical Projects

What Are Armatures, Rotors and Stators?

Why specifications matter

Marine Propeller and Control Components

Turning Point 21431530 aluminum propeller

Garmin Reactor 40 steering actuator

Garmin throttle actuator for Reactor 40 Kicker systems

Marine Actuators for Trim and Position Control

Lenco 15061-001 24-volt actuator

Lenco 15059-001 102 Series standard actuator

Lenco 15057-001 short extreme-duty actuator

Bennett Marine adjustable electric actuator

Trailer Brake Assemblies and Hub Components

AP Products electric brake assembly for 3,500-pound axles

AP Products right-hand brake assembly

AP Products 3,500-pound brake hub