Description: the machine is available in a variety of colors and shipped randomly. Precautions: 1. When using it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts the pressure roller oil hole the universal joint oil hole and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller good working performance and extended bearing life. 2. During granulation it is strictly forbidden for the pressure roller to contact with the template to run idly and the continuous feeding can not be interrupted. At the same time the pressure roller shaft nut is locked to avoid loosening and damaging the spindle keyway. 3. When granulating there is no granulation no discharge the template should be removed and after opening one by one some fiber feed can be added appropriately to restart the granulation. 4. Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox replace the oil seals in time and check whether the bearings in the machine head are short of oil. 5. When the pellet machine is working do not reach into the feeding port with your hands. If necessary use wooden sticks to help feed the pellets. 6. Before turning on the machine it is necessary to add less material before turning on the machine. When shutting down leave a small amount of feed ...
Brand: PreAsion
