Bartley American Oak Gel Stain Quart

The beauty of bartley s gel stains and gel varnish is they are so easy to apply and they have very low odor. You can even use our products on vertical and overhead surfaces without fear of runs drips and sags because it is a gel rather than a liquid. To apply brushes are not required just a soft lint-free cloth. The gel stains are dry to a light touch in seconds and the gel varnish is tack-free in minutes and you do not need to sand or buff with steel wool between coats. Most importantly bartley s gel stains and gel varnish are acclaimed by both professionals and amateurs for ease-of-use and results stain and varnish steps useful tips step 1: start with a clean well-sanded surface. With a small cloth or foam brush apply a generous coat of bartley gel stain to an area no larger than 2 square feet. With a clean lint free cloth or soft paper towel immediately wipe off the excess with the grain until the color is uniform and free of smudges. The newly stained surface should be nearly dry to the touch. Your first coat of stain is done there are no runs no drips and no unpleasant odors for a darker richer tone apply a second or third coat of stain see color chart at right to add significant depth and richness of color. Allow at least six hours between coats. In humid climates drying time will vary. One of the best features about bartley stains is there is no sanding between coats. It couldn’t be easier step 2: note: certain colors like georgian cherry may need longer drying tim... Size: [Quart]

The beauty of bartley s gel stains and gel varnish is they are so easy to apply and they have very low odor. You can...show more