Features: 1.The machine is made up of 1.Trolley frame 2.Milk barrel 3.Complete milking set 4.Vacuum gauge 5.Piston pump 6.Reducer and gearing. 2.Milk barrel is made up of barrel and barrel cover.The capacity of milk barrel is 25l and can contain fresh milk of 20 kilograms.There is a non-return three way valve welded in the middle of the barrel cover. 3.After operating milk machine keep the empty running for 3-5 minutes. There is no block and abnormal noise among all the moving parts. 4.The convert the cluster namely all the connecting inlet of the claw is upward and the teat up inlet upward. 5.One minute later the indicator of the vacuum gauge should reach 0.04-0.045Mpa. Adjust the inlet valve on the claw when the vacuum is too high or too low milking can start until the cooperation of long-and short space between the steel ball and pressure reed reaches 0.04-0.045Mpa. 6.The milker is designed to milk the cows or goats it’s simple to operate and maintain reduce the labor intensity of the milking widely used in small farms and home use parameters: operating vacuum degree:0.04-0.05Mpa pulsation times:64 times per minute power fitted:0.55Kw-0.75Kw voltage: 110v motor speed:1440 rpm per minute the number of milk bucket:one capacity of 25kg the number of milking cattle per hour:20-24 cows per hour employees needed when milking:one the number of milking cup group:two sets details: 1.Add lubricating oil to the inner edge about once every ten days. 2.And you need to pressurize it...
Brand: INTBUYING
