Eberspacher fuel standpipe 600mm most suitable for installation on upper surface of fuel tank when access to tank internal surface not available. Can be installed with access only from exterior of tank surface. Requires 24mm spanner size for tightening of nut for installation
Shorten the immersion tube: the end should be approx. 25 Mm above the bottom of the tank or high enough that fuel for theboat engine always remains in the tank. Cut the tube diagonally. Deburr the cut edges. Outer diameter 6 mm internal diameter 2 mm suitable for many heater types including the following eberspacher heaters eberspacher heater d1lc eberspacher heater d1lcc eberspacher heater d3lc eberspacher heater d3lcc eberspacher heater d5lc eberspacher heater airtronic d2 eberspacher heater airtronic s3 d2l eberspacher heater airtronic d4 eberspacher heater airtronic m3 d4l eberspacher heater airtronic d5 please note for use with metal fuel tanks only
Brand: Eberspacher
