All categories
Business & Offices
Electronics & Media
Fashion & Accessories
Groceries & Essentials
Health & Personal Care
Home & Living
Kids & Family
Sports & Outdoors
Search in ZoneOffer
Loading...
Think of your boiler or furnace like the engine of your house — it does the heavy lifting to keep you warm, and a few smart accessories are the tune-ups that keep it running smoothly. Accessories aren't just extras; they're the difference between a system that sips energy and one that guzzles it. Small investments in the right parts can extend equipment life, reduce fuel bills, and prevent emergency breakdowns that cost a lot more than the accessories themselves.
Ever swapped a pair of shoes for winter and felt instantly better? Upgrading a thermostat or adding a magnetic filter has the same immediate, tangible payoff for your heating system. These upgrades control how and when heat is produced, keep components clean, and let your boiler work smarter — not harder. The result is lower energy use, fewer repairs, and a cozier house without constantly fiddling with the thermostat.
If you're still using a basic dial or manual thermostat, a programmable or smart thermostat is the most user-friendly efficiency upgrade you can make. They let you schedule temperatures by time of day, learn your habits, or even adjust remotely with a phone app. That can translate to noticeable savings — many homeowners see reduced heating costs simply by avoiding heating an empty house. Popular places to buy these include Home Depot, Lowe's, and Amazon, where you can compare brands like Honeywell, Ecobee, and Nest.
Boilers and hydronic systems accumulate sludge and rust over time, which blocks flow and reduces heat transfer. Magnetic filters (also called dirt magnets) and dirt separators capture that debris before it circulates, protecting pumps and heat exchangers. Install one on the return line and expect cleaner water, fewer clogs, and extended component life. HVAC suppliers such as SupplyHouse, Ferguson, and HVACDirect stock a range of sizes that fit typical pipe diameters like 1", 1.25", and 1.5".
An expansion tank absorbs the extra pressure when water heats up and expands. Without a properly sized tank, pressure spikes can lead to leaks, frequent relief valve cycling, or even system damage. Choose an expansion tank with the right gallon capacity for your system and pre-charge pressure set to your boiler’s cold fill pressure (usually around 12–15 psi for residential systems). You can find expansion tanks at big-box stores and specialty HVAC dealers — Lowe's and Ferguson are common retailers.
Water chemistry matters. Corrosion and scale dramatically reduce efficiency and shorten the life of your boiler. Chemical treatment kits and corrosion inhibitors condition the boiler water to prevent rust and scale buildup. These are often sold as easy-to-use kits at stores like Ace Hardware and online at Amazon or Grainger. If your system is older or has frequent corrosion, consider a full water treatment plan from an HVAC pro.
Outdoor reset controls adjust boiler temperature based on the outside temperature, matching heat output to demand. Instead of running at a fixed high temperature, your boiler modulates down on milder days, which improves comfort and saves fuel. Combining a reset control with high-efficiency flue components or a sealed combustion kit can further reduce heat loss and improve overall system performance. These controls and components are available through HVAC suppliers like SupplyHouse and Ferguson, and sometimes at big-box outlets for universal models.
Picking the wrong size expansion tank, filter, or control is like buying shoes two sizes too small — it causes problems fast. Start by checking your boiler’s gallon water content and the system’s maximum working pressure in psi. For expansion tanks, match the tank’s usable gallon capacity to the boiler’s expansion volume. Most residential systems use tanks from 2.5 to 8 gallons, but larger homes with more piping may need bigger tanks.
Install accessories that match your pipe size — 3/4", 1", and 1 1/4" are common in many homes. If you’re unsure, bring a tape measure and measure the outer diameter, or take a photo and compare specs online. Many retailers list compatible pipe sizes in the product description, and stores like Home Depot and Lowe's show installation videos that make matching much simpler.
Big-box stores are excellent for convenience, competitive pricing, and easy returns. They stock popular thermostats, basic magnetic filters, small expansion tanks, and many common under-sink parts. If you want to walk in and take something home the same day, these are reliable options. They also provide online ordering with in-store pickup in many locations if you’d rather click and collect.
When you need professional-grade parts, uncommon sizes, or technical advice, go to an HVAC supplier. These outlets focus on heating and cooling systems and carry robust brands and specialty items like high-capacity expansion tanks, industrial dirt separators, or outdoor reset controllers. They also provide detailed spec sheets and staff who understand system matching and installation nuances.
Online marketplaces are handy for comparing models and reading user reviews. Amazon often has a wide selection and fast shipping, while eBay can be a source for discontinued or hard-to-find items. Be mindful of third-party sellers and check return options and warranty conditions — trusted brand sellers and HVAC-specific shops usually make things easier if you need support.
Some jobs are DIY-friendly: replacing a thermostat, swapping a magnetic filter, or tightening a leaking fitting can be straightforward if you have basic tools and follow instructions. But if the work involves gas lines, combustion components, major plumbing, or electrical wiring, call a licensed HVAC technician. Safety, code compliance, and preserving warranties are worth the service call.
Before you start any work, shut off power to the boiler at the breaker, close fuel or gas valves if working on combustion parts, and relieve system pressure when working on hydronic components. Use a gas detector if you suspect a leak, and always wear gloves and eye protection. If you’re uncomfortable at any step, stop and call a pro — the cost of a mistake can far exceed the price of the accessory.
Stock basic maintenance supplies: replacement thermostats (or batteries for wireless units), extra magnetic filters or filter cartridges, pressure gauges, and a small expansion tank pre-charge pump. Having these on hand means small problems get fixed quickly, keeping downtime and emergency visits to a minimum.
Keep an eye out for short cycling, cold spots in baseboards or radiators, frequent pressure relief valve discharge, or unexplained energy bill spikes. These symptoms often point to clogged circulators, failing expansion tanks, or dirty heat exchangers — all things accessories like magnetic filters and proper controls can help prevent or mitigate.
Imagine your boiler like a car: driving at 60 mph gets better mileage than stop-and-go traffic. A smart thermostat and an outdoor reset control smooth out the system’s operation so it runs longer at lower output, saving fuel. Even a simple magnetic filter can restore lost efficiency from blocked flow, which can shave a few percentage points off fuel consumption — that adds up over a long heating season.
Utilities sometimes offer rebates for efficiency upgrades like smart thermostats or high-efficiency controls. Manufacturers also run promotions through HVAC contractors or retailers. Factor in these rebates and the energy savings over time to calculate ROI; many homeowners see payback in just a few years on well-chosen accessories.
In smaller homes, modest accessories — a programmable thermostat and a small expansion tank — often deliver the biggest bang for the buck. Because system piping is minimal, a compact magnetic filter and regular chemical treatment can keep everything running efficiently without a big upfront investment.
For larger homes or multi-zone hydronic systems, consider larger dirt separators, bigger expansion tanks measured in gallons, and zone-specific thermostats or smart controls. Commercial-grade supplies from Ferguson or SupplyHouse may be more appropriate here due to higher capacities and professional-grade specs.
Before you hit buy, check compatibility with your system’s pipe size, pressure rating, and control signals. Look for clear warranty terms, and choose products with solid documentation or install guides. If you plan to DIY, favor parts with user-friendly connectors and readily available adapters at Home Depot or Lowe's.
Trusted HVAC brands and well-reviewed products tend to reduce headaches. If a part fails, having good customer support or an HVAC dealer nearby makes replacement or troubleshooting much less painful. Specialty suppliers and big-box stores both have value — specialty shops for tech support, big-box for convenience.
Upgrading your boiler and furnace with the right accessories is like tuning a musical instrument — small adjustments can make the whole system sing. Whether you pick up a programmable thermostat at a big-box store or order a high-capacity dirt separator from an HVAC supplier, these accessories protect your investment and boost comfort. If you're strategic about what you buy and where you buy it, you'll enjoy a warmer home and a healthier budget.
Conclusion: Investing a little time and money into the right boiler and furnace accessories pays off quickly in comfort, reliability, and lowered energy bills. From programmable thermostats to magnetic filters and correctly sized expansion tanks, the right parts keep systems running efficiently and help avoid costly repairs. Start with the basics, consult pros for complex jobs, and choose reputable retailers that match your needs.
| Furnace & Boiler Accessories | Price | |
|---|---|---|
| Steam Engine P5 Automatic Boiler Pressure Regulator For External Combustion Engine Model | $ 75,99 | |
| Lennox 45m47 51805u Igniter Electronic | $ 103,63 | |
| Frymaster Dean 8100085 Gasline Flx 1 X 48 Ss16100bp Genuine Oem Part | $ 244,88 |
