This vertical electric sugar cane juicer is made of stainless steel and constructed with 100% copper motor equipped with three roll extrusion automatically separates the juice and residue from machine. Anti-corrosion anti-rust and full of power. Its large inlet to and adjustable nuts adapt to all kinds of thick curved sugar cane. Parameters voltage: 110v frequency:60hz power:1500w size not including tray :19.69 *16.93 *31.5 Productivity:300 kg h before using 1.Put the machine smooth 2. Adjust the roll gap clockwise to tighten and counterclockwise to loose.Starting from the smallest gap counterclockwise a circle roll gap increased by 0.06 1.5 Mm . 3.Wash the machine before use there will be a small amount of rust on the solder joints clean them and apply vegetable oil to prevent rust. 4.The food contact part of the machine is 304 stainless steel. 5.If the machine is jammed by sugar cane cut off the power immediately to prevent burning the motor 6.The exterior of the machine has been wiped with anti-rust oil before leaving the factory. 7. The casing of the machine has been wiped with anti-rust oil before leaving the factory. Note : 1- can t adjust the roll gap too tightly . 2-The ground wires should be attached to the machine. Item included: 134046 electric sugar cane press juicer tray x 1 strainer x 1 user manual x 1
Brand: PreAsion
